A tubing-weight-set compression packer consisting of a sealing section and guided sliding section. It is run with a supporting slip packer, support slips or bottom support and is released by lifting the string.
| Model | Y111-114 | Y111-148 |
|---|---|---|
| Overall length (mm) | 840 | 1050 |
| Maximum body OD (mm) | 114 | 148 |
| Minimum ID (mm) | 62 | 62 |
| Setting load (kN) | 80-100 | 100-120 |
| Working pressure (MPa) | 15 upper / 8 lower | 15 upper / 8 lower |
| Working temperature (°C) | 120 | 120 |
| UP/TBG connection | 2 7⁄8 | 2 7⁄8 |
Used for zonal production, testing, water detection, water shutoff and acidizing.
YUXIN combines product engineering, machining, assembly, inspection and export coordination in Dongying, Shandong.
Send the existing model or drawing, connection dimensions, operating pressure and temperature, well conditions, quantity and destination.
Yes. YUXIN can review drawings and samples for material, tolerance, machining, inspection and batch-production feasibility.
Material and treatment options are selected around pressure, load, corrosion, wear, temperature and sour-service requirements.
Inspection planning can include dimensional checks, material documentation, assembly review and product-specific pressure or functional testing.
Yes. Batch supply, export packing and order documentation can be organized for distributors, service companies and project procurement.
Website data is for preliminary selection. Final compatibility is confirmed against the approved drawing, specification and purchase requirements.
A preset-pressure sliding sleeve used with hydraulic packers. The opening pressure can be configured for the planned treatment…
View product
A tubing anchor whose cone is protected from direct axial string load. Rotating the tubing releases the cone…
View product
A planned release connection for sand-control service strings. Pin-release and back-off configurations provide a controlled separation point if…
View productSend your drawing, model, quantity and operating requirements for a focused response.
Share the product, model, quantity and operating conditions. Our engineering and sales team will review the requirement together.
